The influence of laser alloying with carbon nanotubes of Ti13Nb13Zr on some of its mechanical properties in biomedical application
Article Sidebar
Main Article Content
Abstract
The titanium alloy Ti13Nb13Zr was used as a substrate, because of its chemical composition and good mechanical properties in application of tissue engineering. The aim of the work was the assessment of the influence of laser alloying of Ti13Nb13Zr coated with multi-walled carbon nanotubes for mechanical properties (roughness, nanohardness, Young modulus). Electrophoretic deposition (EDP) method was used to prepare carbon coating. Laser modification was carried out with Nd:YAG laser in pulsed mode operating system. The power of the impulse was 800 W and the time 0,5 ms and 1 ms. Mechanical properties were checked with nanoindenter and roughness of the surface with Atomic Force Microscope (AFM). The improvement of mechanical properties (the nanohardness increases more than twice) and its homogeneity within tested area (in the comparison to the native material) was seen after implementation of carbon nanotube coating with appropriate parameters of the process.
Downloads
Article Details
Creative Commons CC BY 4.0 https://creativecommons.org/licenses/by/4.0/
Welding Technology Review (WTR) articles are published open access under a CC BY licence (Creative Commons Attribution 4.0 International licence). The CC BY licence is the most open licence available and considered the industry 'gold standard' for open access; it is also preferred by many funders. This licence allows readers to copy and redistribute the material in any medium or format, and to alter, transform, or build upon the material, including for commercial use, providing the original author is credited.
References
Marciniak J.: Biomateriały, Wydawnictwo Politechniki Śląskiej, Gliwice 2013.
http://zasoby1.open.agh.edu.pl/dydaktyka/chemia/a_e_chemia/1_3_ budowa_materii/01_04_03_2b.htm [dostęp:20.05.2018]
Dresselhaus M. S., Dresselhaus G., Avouris P.: Carbon Nanotubes: Synthesis, Structure, Properties, and Applications. Springer-Verlag Berlin Heidelberg 2001.
Bachmatiuk A.: Praca doktorska: Badania nad technologią otrzymywania i właściwościami nanorurek węglowych, Politechnika Szczecińska. Wydział Technologii i Inżynierii Chemicznej. Instytut Technologii Chemicznej Nieorganicznej i Inżynierii Środowiska, Szczecin 2008.
Dlugon E., Simka W., Franczek-Szczypta A., Niemiec W., Markowski J., Szymanska M., Blazewicz M.: Carbon nanotube-based coatings on titanium, Bull. Mater. Sci., Vol. 38, No. 5, September 2015, pp. 1339-1344.
Bartmański M., Berk A., Wójcik A.: The Determinants of Morphology and Properties of the Nanohydroxyapatite Coating Deposited on the Ti13Nb13Zr Alloy by Electrophoretic Technique, Advances in Materials Science, Vol. 16, No. 3 (49), 2016.
Sidun J., Dąbrowski J. R.: Aspekty biomechaniczne uszkodzeń minipłytek zespalających kości twarzoczaszki, MOTROL, 2009, 11c, s. 176-181.
Niinomi M., Narushima T., Nakai M.: Advances in Metallic Biomaterials, Tissues, Materials and Biological Reactions, Springer Series in Biomaterials Science and Engeenering, 2015.
Voggenreiter G., Leiting S., Brauer H., Leiting P., Majetschak M., Bardenheuer M., Obertacke U.: Immuno-inflammatory tissue reaction to stain- less-steel and titanium plates used for internal fixation of long bones, Biomaterials 24, 2003, pp. 247-254.
Besra L., Liu M.: A review on fundamentals and applications of electrophoretic deposition (EPD). Progress in Materials Science 52, 2007, pp. 1-61.
Yamaguchi T., Hagino H.: Formation of titanium carbide layer by laser alloying with a light-transmitting resin. Optics and Lasers in Engineering 88, 2017, pp. 13-19.
Borek A., Grzelka R., Klimpel A., Mucha S., Ścibisz B.: Technologie laserowe spawania, wytwarzania i obróbki cieplnej warstw wierzchnich, Przegląd Spawalnictwa vol. 85, nr 10, 2013.
Makuch N., Kulka M., Dziarski P., Przestacki D.: Laser surface alloying of commercially pure titanium with boron and carbon. Optics and Lasers in Engineering 57, 2014, pp. 64-81.
Miklaszewski A., Kaczmarek M., Jurczyk M. U.: Powierzchniowe stopowanie mikroplazmowe jako nowe podejście w zakresie modyfikacji biomateriałów tytanowych, Przegląd Spawalnictwa vol. 89, nr 10, 2017.
Filip R.: Kształtowanie mikrostruktury warstwy wierzchniej stopu tytanu Ti-6Al-4V poprzez stopowanie laserowe, Inżynieria Materiałowa 5, 2005.
Filip R.: Alloying of surface layer of the Ti-6Al-4V titanium alloy through the laser treatment. Journal of Achievements in Materials and Manufacturing Engineering, vol. 15, 1-2, 2006.
Michalak M., Łatka L., Sokołowski P.: Porównanie właściwości mechanicznych powłok natryskiwanych plazmowo proszkowo I z zawiesin. Przegląd Spawalnictwa, vol. 89 nr 10, 2017.