Pękanie zimne stali spawanej w środowisku wodnym

Main Article Content

Dariusz Fydrych

Abstract

W artykule scharakteryzowano zagrożenia spawalności stali konstrukcyjnych związane z przeniesieniem spawania do środowiska wodnego. Przedstawiono stan wiedzy oraz wyniki własnych prac badawczych dotyczących wpływu warunków i parametrów spawania pod wodą na wrażliwość do pękania zimnego stali konstrukcyjnych. Zwrócono uwagę na to, że pomimo znaczącej liczby publikacji wciąż wiele istotnych zagadnień pozostaje nierozwiązanych. 

Cold cracking of steel welded in water environment 

The paper characterizes limitations in weldability of structural steel associated with the transfer of welding to the water environment. The state of the art and the results of research works concerning the effect of conditions and parameters on susceptibility to cold cracking of structural steels were presented for most common underwater welding techniques. Attention was drawn to recent research trends and inconsistencies in the information related to the considered issues. A thesis was formulated that, despite of the significant number of publications, still many important aspects of weldability of steel remain unsolved. 


Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
D. Fydrych, “Pękanie zimne stali spawanej w środowisku wodnym”, Weld. Tech. Rev., vol. 84, no. 10, Oct. 2012.
Section
Original Articles

References

Bailey N.: Weldability of ferritic steels. Abington Publishing, Abington Hall, Cambridge, England 1994.

Butnicki S.: Spawalność i kruchość stali. Wydawnictwa Naukowo-Techniczne, Warszawa 1991.

Cotton H. C.: Welding under water and in the splash zone a review. Proceedings of the International Conference Underwater Welding, Trondheim, Norway 1983.

Christensen N.: The metallurgy of underwater welding. Proceedings of the International Conference Underwater Welding, Trondheim, Norway 1983.

Łabanowski J., Fydrych D., Rogalski G.: Underwater Welding a review. Advances in Materials Science 3/2008.

Lesiński K.J.: Metalurgiczne aspekty spawania pod wodą. Materiały konferencji naukowo-technicznej Problemy cięcia i spawania pod wodą, ITMMiS, Gdańsk 1985.

Ibarra S., Grubbs C.E., Liu S.: State of the art and practice of underwater wet welding of steel. International workshop on underwater welding of marine structures. New Orleans, USA, 1994.

Zhang X., Ashida E., Shono S., Matsuda F.: Effect of shielding conditions of local dry cavity on weld quality in under-water Nd:YAG laser welding. Journal of Materials Processing and Technology. Vol. 174, issues 1-3, May 2006.

Fydrych D., Rogalski G.: Wpływ warunków spawania podwodnego metodą lokalnej komory suchej na zawartość wodoru dyfundującego w stopiwie. Przegląd Spawalnictwa 11/2009.

Ambroziak A., Gul B.: Podwodne zgrzewanie tarciowe uplastycznionym trzpieniem stalowym złączy zakładkowych (FHPP). Przegląd Spawalnictwa 9-10/2006.

Bartnicki K.: Ocena skłonności do tworzenia pęknięć zimnych stali spawanej pod wodą. Praca dyplomowa stopnia inżynierskiego realizowana pod kierunkiem dr. inż. Dariusza Fydrycha. Politechnika Gdańska, Gdańsk 2012.

Kurzawa P.: Spawalność stali wysokiej wytrzymałości spawanej pod wodą. Praca dyplomowa stopnia inżynierskiego realizowana pod kierunkiem dr. inż. Dariusza Fydrycha. Politechnika Gdańska, Gdańsk 2012.

Hasai A., Suga Y., Kishi S.: On underwater submerged arc welding (the 2nd report). Transactions of the Japan Welding Society, 1/1980.

Fydrych D., Rogalski G.: Wpływ warunków spawania mokrego elektrodą otuloną na zawartość wodoru dyfundującego w stopiwie. Przegląd Spawalnictwa 2/2008.

Medeiros R.C., Liu S.: A predictive electrochemical model for weld metal hydrogen pickup in underwater wet welds. Journal of Offshore Mechanics and Arctic Engineering, 11/1998.

Kononenko W. Ya.: Effect of water salinity and mechanized underwater welding parameters on hydrogen and oxygen content of weld metal. Proceedings of the International Conference Welding Under Extreme Conditions, Helsinki, Finland 1989.

Fydrych D., Rogalski G.: Badania procesów spawania pod wodą. Sprawozdanie z pracy badawczej BW 014693 08, Po- litechnika Gdańska, Gdańsk 2010.

Hoffmeister H., Kuster K.: Process variables and properties of underwater wet shielded metal arc laboratory welds. Proceedings of the International Conference Underwater Welding, Trondheim, Norway 1983.

Hoffmeister H., Kuster K.: Process variables and properties of wet underwater gas metal arc laboratory and sea welds of medium strength steels. Proceedings of the International Conference Underwater Welding, Trondheim, Norway 1983.

Matsuda K., Masumoto I., Hasegawa M.: Study on the crack sensitivity of mild steel welded joint by underwater welding. Proceedings of the International Conference Joining of Me- tals 2, Helsingor, Denmark 1984.

Ozaki H., Naiman J., Masubuchi K.: A study of hydrogen cracking in underwater steel welds. Welding Journal, 8/1977.

Fydrych D., Rogalski G., Łabanowski J.: Spawalność stali o podwyższonej wytrzymałości w warunkach podwodnych.

Przegląd Spawalnictwa 11/2011.

Bohme D., Eisenbeis C.: Investigation into the credibility of

the implant test when used to assess the cold cracking sensitivity of underwater wet welds. Proceedings of the International Conference Welding Under Extreme Conditions, Helsinki, Finland 1989.

Brink S.H., Boltje G.W.: Cold cracking susceptibility of welds obtained by wet underwater welding. Proceedings of the International Conference Underwater Welding, Trondheim, Norway 1983.

Yara H., Makishi Y., Kikuta Y., Matsuda H.: The TRC test for high strength steel in wet underwater welding. Transactions of the Japan Welding Society, 4/1988.

Fydrych D.: Wpływ warunków spawania na skłonność do tworzenia pęknięć zimnych przy spawaniu pod wodą. Praca doktorska, Politechnika Gdańska, Gdańsk 2005.

Ando S., Asahina T.: A study on the metallurgical properties of steel welds with underwater gravity welding. Proceedings of the International Conference Underwater Welding, Trondheim, Norway 1983.

Skorupa A., Bal M.: Wpływ środowiska wodnego na jakość połączeń spawanych pod wodą. Przegląd Spawalnictwa 3/1986.

Tasak E., Bal M.: Struktura i właściwości spoin wykonanych elektrodami otulonymi pod wodą. Przegląd Spawalnictwa 1-2/1985.

Suga Y., Hasui A.: Effect of pressure on mechanical properties of welded joints on gravity arc welding under high pressure atmosphere. Transactions of the Japan Welding Society, 2/1991.

Suga Y.: Effect of diffusible hydrogen on mechanical properties of underwater welded joints study on improving the mechanical properties of underwater welded joints (the 1st report). Transactions of the Japan Welding Society, 10/1985.

Kostro Ł.: Podwodne spawanie stali o wysokiej wytrzymałości. Praca dyplomowa stopnia inżynierskiego realizowana pod kierunkiem dr. inż. Dariusza Fydrycha. Politechnika Gdańska, Gdańsk 2011.

Jakóbczak P.: Ocena spawalności stali spawanej metodą mokrą. Praca dyplomowa stopnia inżynierskiego realizowana pod kierunkiem dr. inż. Dariusza Fydrycha. Politechnika Gdańska, Gdańsk 2011.

Grubbs C. E.: Joint industry underwater welding development program. Phase I final report. Global Divers & Contractors Inc., Colorado School of Mines, 1995.

Fydrych D., Łabanowski J.: Zastosowanie techniki ściegu odpuszczającego w warunkach spawania mokrego. Prace Naukowe Politechniki Warszawskiej. Seria: Mechanika. Warszawa 2012 (w druku).

Sawicki S.: Spawanie podwodne metodą lokalnej komory suchej. Praca dyplomowa stopnia magisterskiego realizowana pod kierunkiem dr. inż. Dariusza Fydrycha. Politechnika Gdańska, Gdańsk 2011.

Skorupa A., Masłowski A., Bal M.: Wytrzymałość połączeń spawanych pod wodą metodą hiperbaryczną. Przegląd Spawalnictwa 3/1996.

Thomas D. B. J. Users requirements and control of activities. Proceedings of the International Conference Underwater Welding, Trondheim, Norway 1983.

Walczak W., Fydrych D.: Skłonność złączy wykonanych pod wodą do tworzenia pęknięć zimnych. Prace Naukowe Politechniki Warszawskiej. Seria: Mechanika z. 215. Warszawa 2006.

Rogalski G.: Pomiary cykli cieplnych przy spawaniu pod wodą. Prace Naukowe Politechniki Warszawskiej. Seria: Mechanika. Warszawa 2012 (w druku).

Rogalski G., Fydrych D.: Wpływ parametrów spawania pod wodą na twardość złączy. Prace Naukowe Politechniki Warszawskiej. Seria: Mechanika z. 230. Warszawa 2010.

Fydrych D., Kozak T.: Effect of welding conditions on susceptibility to cold cracking of underwater welded joints. Proceedings of International Conference Wissenschaft fur die Praxis, Bremen, Germany 2006.

Fydrych D., Kozak T.: Underwater welded joint properties investigation. Advances in Materials Science 4/2009.

Most read articles by the same author(s)

1 2 3 > >>